TEL. & FAX +66(0)2-020-3301
 |
 |
 |
Moxa’s UC-8580 is an innovative computing platform designed specifically for transportation applications.
The UC-8580 is available with one of two different types of antenna connectors. The SMA model supports all SMA type connectors. The QMA model supports TNC connectors for GPS and QMA connectors for Wi-Fi/cellular modules, and has four slots for installing wireless modules. Three slots support 4G LTE modules, and one slot supports a Wi‑Fi module. Each 4G LTE module has two SIM card slots, which can be used to enable redundant cellular network communications or geo-fencing SIM card selection by leveraging the built-in Wireless Manager, a Moxa software utility for cellular and Wi-Fi management.
The UC-8580 uses an open platform based on Debian 8 with Linux kernel 4.1, allowing solution providers to manage software packages via Debian’s APT (Advanced Packaging Tools), or develop software applications with Moxa’s API Library and GNU C Library.
The UC-8580’s single-sided I/O design is ideal for vehicle applications, which typically do not have a lot of room for installing communications devices. The UC-8580 also has an access panel on the front side, allowing users to install or change wireless modules, SIM cards, or mSATA cards without removing the entire unit from the wall after being mounted.
The UC-8580 can be used as a communication-centric computing platform for the following applications:
Computer | |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| System Memory Pre-installed | 1 GB DDR3L |
| Supported OS | Linux Debian 8 (Linux kernel v4.1) |
| Storage Slot | mSATA slots x 1, internal mini-PCIe socket |
| Storage Pre-installed | 4 GB eMMC |
Computer Interface | |
| Ethernet Ports | Auto-sensing 10/100/1000 Mbps ports (M12 X-coded) x 2 |
| Serial Ports | RS-232/422/485 ports x 2, software-selectable (terminal block) |
| USB 3.0 | USB 3.0 hosts x 1, type-A connectors |
| Digital Input | DIs x 3 |
| Digital Output | DOs x 3 |
| Expansion Slots | mPCIe slot x 4 |
| Wi-Fi Antenna Connector | UC-8580-LX/8580-T-LX/8580-T-CT-LX: RP-SMA x 3 UC-8580-Q-LX/8580-T-Q-LX/8580-T-CT-Q-LX: QMA x 3 |
| Cellular Antenna Connector | UC-8580-LX/8580-T-LX/8580-T-CT-LX: SMA x 6 UC-8580-Q-LX/8580-T-Q-LX/8580-T-CT-Q-LX: QMA x 6 |
| Number of SIMs | 6 |
| SIM Format | Mini |
| GPS Antenna Connector | UC-8580-LX/8580-T-LX/8580-T-CT-LX: SMA x 1 UC-8580-Q-LX/8580-T-Q-LX/8580-T-CT-Q-LX: TNC x 1 |
| Console Port | RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) |
Input/Output Interface | |
| Buttons | Reset button |
Digital Inputs | |
| Channel-to-Channel Isolation | 3K VDC |
| Connector | Screw-fastened Euroblock terminal |
| Counter Frequency | 25 Hz |
| Dry Contact | On: short to GND Off: open |
| I/O Mode | DI |
| Points per COM | 3 x channel |
| Sensor Type | Wet Contact (NPN or PNP) |
| Wet Contact (DI to COM) | On: 10 to 30 VDC Off: 0 to 3 VDC |
Digital Outputs | |
| Connector | Screw-fastened Euroblock terminal |
| Current Rating | 200 mA per channel |
| I/O Type | Sink |
| Voltage | 0 to 30 VDC |
LED Indicators | |
| System | Power x 1 System Ready x 1 Programmable x 1 |
| Wireless Signal Strength | Cellular/Wi-Fi x 12 |
| LAN | 2 per port (10/100/1000 Mbps) |
| Serial | 2 per port (Tx, Rx) |
Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
GPS Interface | |
| Heading Accuracy | 0.3 degrees |
| Industrial Protocols | NMEA 0183, version 4.0 (V2.3 or V4.1 configurable), UBX, RTCM |
| Receiver Types | 72-channel u-blox M8 engine |
| Time Pulse | 0.25 Hz to 10 MHz |
| Velocity Accuracy | 0.05 ms |
Power Parameters | |
| Input Current | 1.66 A @ 24 VDC, 0.36 A @ 110 VDC |
| Input Voltage | 24 to 110 VDC |
| Power Connector | M12 A-coded 4-pin male connector |
| Power Consumption | 40 W (max.) |
Physical Characteristics | |
| Housing | Metal |
| IP Rating | IP40 |
| Dimensions (with ears) | 270 x 134 x 88 mm (10.63 x 5.28 x 3.46 in) |
| Dimensions (without ears) | 220 x 134 x 88 mm (8.66 x 5.28 x 3.46 in) |
| Weight | Product only: 2,200 g (4.85 lb) |
| Installation | Wall mounting |
| Protection | -CT models: PCB conformal coating |
Environmental Limits | |
| Operating Temperature | Standard Models: -25 to 55°C (-13 to 131°F) Wide Temp. Models: -40 to 70°C (-40 to 158°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
| Railway | EN 50121-4, EN 50155 |
| Railway Fire Protection | EN 45545-2 |
| Safety | EN 60950-1, UL 60950-1 |
| Shock | IEC 60068-2-27, IEC 61373, EN 50155 |
| Vibration | IEC 60068-2-64, IEC 61373, EN 50155 |
Declaration | |
| Green Product | RoHS, CRoHS, WEEE |
Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| Name | Type | Version | Release Date | |
| Datasheet for UC-8580 Series | Datasheet | V1.1 | 21 January 2020 |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| Antenna Connector Type | SMA |
| Operating Temp. | -25 to 55°C |
| Conformal Coating | - |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| Antenna Connector Type | SMA |
| Operating Temp. | -40 to 70°C |
| Conformal Coating | - |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| Antenna Connector Type | SMA |
| Operating Temp. | -40 to 70°C |
| Conformal Coating | ✓ |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| Antenna Connector Type | QMA |
| Operating Temp. | -25 to 55°C |
| Conformal Coating | - |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| Antenna Connector Type | QMA |
| Operating Temp. | -40 to 70°C |
| Conformal Coating | - |
| CPU | Armv7 Cortex-A7 dual-core 1 GHz |
| Antenna Connector Type | QMA |
| Operating Temp. | -40 to 70°C |
| Conformal Coating | ✓ |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639
